|
Ipswich |
| EMERGENCY BOARDING & GLAZING - SAME DAY SERVICE |
We offer FREE Information, advice and Estimates / quotations for broken glass, broken window, glass, glass replacement, double glazed units, double glazing, shopfront doors, shopfront windows, plate glass, and glass repairs, lead lights
|
|
Bullet-resistant glass is usually constructed using polycarbonate thermoplastic and layers of laminated glass. The aim is to make a material with the appearance and clarity of standard glass but with effective protection from small arms. Polycarbonate designs usually consist of products such as Armormax, Makroclear, Cyrolon, Lexan or Tuffak, which are often sandwiched between layers of regular glass. The plastic in laminate designs provides resistance to impact from physical assault from hammers, axes, clubs, and so forth. The plastic provides little in the way of bullet-resistance. The glass, which is much harder than plastic, flattens the bullet, which prevents penetration. This type of bullet-resistant glass is usually 70–75 millimetres (2.8–3.0 inches) thick. |
|
|
|
|
Cat
Flaps Fitted |
Laminated glass layers are built from glass sheets bonded together with polyvinyl butyral, polyurethane or ethylene-vinyl acetate. This design has been in regular use on combat vehicles since World War II; it is typically 100–120 millimetres (3.9–4.7 inches) thick and is usually extremely heavy.
One-way
Advances in bullet-resistant glass have led to the invention of one-way bulletproof glass, such as used in some bank armored cars. This glass resists incoming small arms fire striking the outside, but will allow those on the other side, such as guards inside the vehicle, to fire out through the glass at the exterior threat.
One-way bulletproof glass is usually made up of two layers, a brittle layer on the outside and a flexible one on the inside. A bullet fired from the outside hits the brittle layer first, shattering an area of it. This absorbs some of the bullet's kinetic energy, and spreads it on a larger area. When the slowed bullet hits the flexible layer, it is stopped. However, when a bullet is fired from the inside, it hits the flexible layer first. The bullet penetrates the flexible layer because its energy is focused on a smaller area; the brittle layer then shatters outward due to the flexing of the inner layer and does not significantly hinder the bullet's progress.
The ability of a glass to withstand shock is improved by the process of tempering. When treated with heating and cooling or with chemical processes, the glass becomes much stronger.
"One-way" bullet-resistant glass is far from being perfected; there is evidence that shows it can be achieved, but in most cases when shooting from the "safe-side", the intended target would have to be very close for the bullet to cause lethal wounds.
* Top Layer:..Glass
* Interlayer:..Transparent thermoplastic material like TPU, PVB or EVA
* Interlayer:..LED (light emitting diodes)on transparent conductive
Polymer
* Interlayer:..Transparent thermoplastic material like TPU, PVB or EVA
* Bottom layer:..Glass
Also see: Toughened Safety Glass - Bullet Proof Glass - Anti Bandit Glass - Laminated Safety Glass
Local
glazier covering Ipswich & surrounding Area's. Emergency glass supplied
& fitted in Ipswich
Cat Flaps - Double Glazing - Broken Window Repairs - Shops Glass - Shop
Doors - Patio Doors Repairs